This is the COMPLETE factory Technical Manual for the John Deere Combines. This manual is very detailed and contains information and data to this model. has specs, diagrams, and actual real photo illustrations, and schemes. which give you complete step by step operations on repair, assembly, disassembly, Diagnosing, servicing, technical maintenance & troubleshooting procedures for your machine.
Models Covered:
=========
John Deere 932 Combines
John Deere 942 Combines
John Deere 952 Combines
John Deere 955 Combines
John Deere 965-H Combines
John Deere 968-H Combines
John Deere 975 Combines
John Deere 975 Hydro/4 Combines
John Deere 985 Combines
John Deere 985 Hydro/4 Combines
John Deere 1065 Combines
John Deere 1068-H Combines
John Deere 1072 Combines
John Deere 1075 Combines
John Deere 1075 Hydro/4 Combines
John Deere 1085 Combines
John Deere 1085 Hydro/4 Combines
THIS MANUAL COVERS:
=========
SECTION 10 – GENERAL
Group 00 – Specifications and Special Tools
Group 05 – General Information
Group 10 – Pre-Delivery Inspection, Delivery Service and After-sales Inspection
Group 15 – Lubrication and Periodic Service
Group 20 – Engine and Combine Tune-Up and Adjustments
Group 25 – Combine Separation
SECTION 20 – ENGINE REPAIR
Group 00 – Specifications and Special Tools
Group 05 – Cylinder Head, Valves, Camshaft and Balancer Shafts (Engines 3179, 4239, 6359)*
Group 06 – Cylinder Head, Valves, Camshaft and Balancer Shafts (Engine 6466)**
Group 10 – Cylinder Block, Liners, Pistons and Connecting Rods (Engines 3179, 4239, 6359)*
Group 11 – Cylinder Block, Liners, Pistons and Connecting Rods (Engine 6466)**
Group 15 – Crankshaft, Main Bearings and Flywheel (Engines 3179, 4239, 6359)*
Group 16 – Crankshaft, Main Bearings and Flywheel (Engine 6466)**
Group 20 – Lubrication System (Engines 3179, 4239, 6359)*
Group 21 – Lubrication System (Engine 6466)**
Group 25 – Cooling System (Engines 3179, 4239, 6359)*
Group 27 – Fan Drive Contershaft
Group 26 – Cooling System (Engine 6466)**
Group 30 – Timing Gear Train (Engines 3179, 4239, 6359)*
SECTION 30 – FUEL AND AIR REPAIR
Group 00 – Specifications and Special Tools
Group 05 – Air Intake System
Group 10 – Fuel System
Group 11 – Fuel Filter with Water Trap and Electrical Fuel Transfer Pump from Serial No. 041201
Group 15 – Roto Diesel Fuel Injection Pump
Group 20 – Roosa Master Fuel Injection Pump
Group 25 – Robert Bosch Fuel Injection Pump
Group 30 – Roosa Master Fuel INjection Nozzles
Group 35 – Robert Bosch Fuel Injection Nozzles KDEL (21 mm)
Group 40 – Speed Control Linkage
SECTION 40 – ELECTRICAL SYSTEM
Group 00 – Specifications and Special Tools
Group 05 – Diagnosing Malfunctions
Group 10 – Electrical System Components
Group 15 – Wiring Diagrams and Wiring Harnesses
Group 20 – Starting Motor (Bosch) Starting Motor (John Deere)
Group 30 – Alternator (Bosch)
Group 35 – Alternator (Delcotron)
Group 40 – Electrical Leveling Control System (Sidehill Combines)
SECTION 41 – MODIFIED ELECTRICAL EQUIPMENT ON COMBINES FROM SERIAL NO. 041201
Group 05 – Wiring Harnesses and Connectors
Group 06 – Electrical Circuits and Wirong Diagrams
Group 07 – Testing Individual Circuits
Group 10 – Starting Motor
Group 15 – Alternator
Group 20 – Components
Group 25 – Shaft Low Speed Monitor System
Group 30 – Harvestrak Combine Monitor – Functional Description and Tests
Group 35 – Harvestrak Combine Monitor – Repair
Group 40 – Electromagnetic Transmission Brake
SECTION 50 – POWER TRAIN
Group 00 – Specifications and Special Tools
Group 05 – Variable Ground Speed Drive
Group 10 – “Posi Torq” Ground Drive
Group 15 – Engine Clutch and Clutch Linkage (932, 942, 952)
Group 20 – Engine Clutch and Clutch Linkage (955)
Group 25 – Engine Clutch (955 to 1085)
Group 26 – Clutch fron Ser. No. 044137
Group 30 – Reverser Clutch, Control and Linkage
Group 35 – Hydrostatic Drive
Group 40 – Front Axle (932, 942, 952)
Group 45 – Transmission and Differential (955 to 1085 Hydro/4)
Group 50 – Final Drives (955, 965, 975 to 1085 Hydro/4)
Group 51 – Rice Drives
Group 55 – Final Drive (Sidehill Combines)
Group 60 – Track System
SECTION 60 – BRAKES AND REAR AXLE
Group 00 – Specifications and Special Tools
Group 05 – Parking Brake (932, 942, 952)
Group 10 – Parking Brake (955 to 1085 Hydro/4)
Group 15 – Footbrakes (Disk Brakes Acting on Transmission)
Group 16 – Footbrakes (With Integrated Slave Cylinder)
Group 20 – Footbrakes (Disk Brakes Acting on Front Wheels)
Group 25 – Rear Axle
Group 30 – Rear Axle (Sidehill Combines)
Group 35 – V-Support for Wide Rear Axle
SECTION 70 – HYDRAULIC SYSTEM
Group 00 – Specifications and Special Tools
Group 05 – General Information, Diagnosing Malfunctions
Group 06 – Hydraulic Symbols and System Layout
Group 10 – Pressure Tests
Group 15 – Hydraulic Oil Reservoir, Filter, Suction and Pressure Lines
Group 20 – Hydraulic Pump and Flow Divider
Group 25 – Tandem (Dual-Gear) Hydraulic Pump
Group 30 – Triple Hydraulic Pump
Group 35 – Single and Three Spool Control Valves
Group 40 – Seven Spool Control Valve
Group 41 – Seven Spool Control Valve (from Serial No. 041201)
Group 45 – Hydraulic Cylinders (up to a certain serial no.)
Group 50 – Hydraulic Cylinders (from a certain serial no.)
Group 55 – Nitrogen Accumulators
Group 60 – Hydrostatic Steering
Group 65 – Hydraulic Brakes
Group 70 – Hydraulic Clutch Control
Group 71 – Clutch Operation with Integrated Slave Cylinder
Group 75 – Transmission Brake
Group 80 – Hydraulic Components (Sidehill Combines)
Group 85 – Hydraulic Drive Reel or Belt Pick-Up System
Group 90 – Hydraulic Reverser Motor
SECTION 80 – MISCELLANEOUS
Group 00 – Specifications and Special Tools
Group 05 – General Information
Group 10 – Bearings and Shafts
Group 15 – Belts and Chains
SECTION 90 – OPERATOR’S CAB
Group 00 – Specifications and Special Tools
Group 05 – Cab Ventilation
Group 10 – Air Conditioning System
Group 15 – Air Conditioning System Components
Group 20 – Heater
SECTION 95 – OPERATOR’S PLATFORM WITH SG-2 CAB (-044136)
Group 00 – Specifcications and Special Tools
Group 05 – Cab Ventilation
Group 10 – Air Conditioning System
Group 15 – Compressor
Group 20 – System Components
Group 25 – Cab Heating System
Group 30 – Operator’s Seat
Group 35 – SG2 Cab
SECTION 96 – OPERATOR’S PLATFORM WITH SG-2 CAB (044137-)
Group 05 – Cab Ventilation
Group 10 – Air Conditioning System
Group 15 – System Service
Group 20 – System Testing
Group 25 – Compressor
Group 30 – System Components
Group 35 – Cab Heating System
Group 40 – Operator’s Seat
Group 45 – SG2 Cab
SECTION 100 – CUTTING PLATFORM AND CORN HEAD
Group 00 – Specifications and Special Tools
Group 05 – General Information, Diagnosing Malfunctions
Group 10 – Cutting Platform and Knife Drive
Group 11 – 200-Series Platform
Group 15 – Variable Reel Speed Drive
Group 20 – Corn Head
Group 25 – Corn Head Gear Case
SECTION 110 – FEEDER HOUSE
Group 05 – General Information, Diagnosing and Malfunctions
Group 10 – Feeder Drive
Group 15 – Feeder House (with Integrated Cutting Platform)
Group 20 – Feeder House (with Quick-Tach Cutting Platform)
Group 21 – Feeder House (with Quick-Tach Cutting Platform)
Group 25 – Chain Transmission – Cutting Platform Drive
Group 30 – Hydraulic Reverser
SECTION 120 – SEPARATOR AND CLEANING UNIT
Group 00 – Specifications and Special Tools
Group 05 – General Information, Diagnosing Malfunctions
Group 10 – Separator Drive
Group 15 – Threshing Cylinder, Variable Cylinder Drive
Group 20 – Cylinder Drive Reduction Gear (Up to Serial No. 039866)
Group 21 – Cylinder Drive Reduction Gear (From Serial No. 039867)
Group 25 – Concave
Group 30 – Beater, Beater Variable Drive
Group 35 – Cross Shaker
Group 40 – Straw Walkers, Cleaning Shoe with Sieves and Fan
SECTION 130 – ELEVATORS, GRAIN TANK AND GRAIN TANK UNLOADING AUGERS
Group 05 – General Information, Diagnosing Malfunctions
Group 10 – Elevator and Auger Drives
Group 15 – Clean Grain Auger and Elevator
Group 20 – Lower Tailings Auger, Elevator and Upper Auger
Group 25 – Grain Tank Leveling Auger and Unloading Auger
Group 30 – Outer Unloading Auger and Housing
SECTION 140 – SPECIAL EQUIPMENT
Group 00 – Specifications and Special Tools
Group 05 – Straw Chopper with Centrifugal and Electric Clutch
Group 10 – Straw Chopper with Direct Drive
Group 15 – Straw Spreader
————–
Model Specification: John Deere Combines
Publication number: TM4387
Total Pages: 1697
File Format: PDF
Requirements: Adobe PDF Reader
Language: English
Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
————–
This manual is in PDF format, The Technical Manual PDF is Fully Indexed and Bookmarked by Topic. This is an original Adobe document which equals Perfect Quality and Perfect Printing. The PDF can be searched quickly to find what you need to know in every Chapter. You can print the Entire manual or ANY Pages you want to select. You can also Zoom in on any Diagram or Picture to easily SEE EVERY PART.
Save time and money by doing your own repairs! This manual makes any repair job easy to do with very easy to follow step-by-step instructions & pictures on all areas of repair.
This manual is INSTANT DOWNLOAD. It means no shipping cost or waiting for a CD / paper manual to Arrive in the Mail. You will be able to download the file immediatly after payment is submitted. The download link will appear at the checkout page and it will be emailed to you as well.
After your payment is submitted, The Download Link will appear at the checkout page and it will also be sent to your E-Mail Address.
Thanks for visiting!